Page 1 of 1

G29 rfactor2 .ini files

Posted: 05 Sep 2017, 08:38
by Law
The guide on how to get the leds working for rfactor 2 is out of date it says:

Use Additional Hardware Features="1" // Whether to use additional hardware features like steering wheel LEDs
Hardware 3Digit Display="1" // If hardware has 3-digit display, 0=off, 1=gear, 2=speed
If you change the "1" values to "0", native support will no longer be enabled so it does not interfere with Fanaleds.

the .ini files say:
"Hardware 3Digit Display":0, <changed this 1 to 0 was only one I could find
"Hardware 3Digit Display#":"If hardware has 3-digit display, 0=off, 1=gear, 2=speed",
"Use Additional Hardware Features":true,
"Use Additional Hardware Features#":"Whether to use additional hardware features like steering wheel LEDs",

After changing these the LEDs just keep flashing when your driving in game. I am sure I used the correct .ini file corresponding to the controls i'm using in game. and i have used the hardware tab and set the LEDs to light up as the revs go up