Verbose I can't find <settings version="1" />

[tifosi79]

When I open the XML file I don't see the <settings version="1" /> at the bottom of the file or anywhere. Also, in the first step it says "Without the board connected start fanaleds and go to File->Open Settings folder". What board?


Under File->Open Settings folder I have two folders. Default file which is a XML Document and lastlog a Text Document. When I open the Default file with notepade this is what I get:

<?xml version="1.0" encoding="ISO-8859-1" ?>
<config>
<!-- Sample XML config file for Fanatec Leds -->
<!-- Supported modes are: speed, gear, speedgear, fakerevs and fuel. Default is speedgear -->
<!-- Supported gauges are: kph and mph. Default is kph -->
<!-- If the telemetry of a game doesn't allow a particular mode it will revert back to default GEAR mode -->
<settings mode="gear" gauge="kph" joyID="0" buttonID="0">
<insim ip="127.0.0.1" port="29999" pass="" enabled="false" />
<outgauge ip="127.0.0.1" port="30000" />
<outsim ip="127.0.0.1" port="30500" />
</settings>
<!-- Flash frequencies can be any value between 50ms and 5000ms, with steps of 50ms -->
<lights>
<shiftlights frequency="150" flashbrackets="yes" revleds="yes" />
<pitlights frequency="200" />
<fuelempty frequency="250" percentage="5" />
</lights>
<rumble>
<brakepedals on="yes" threshold="98" />
<brakewheel on="yes" />
<shift on="yes" />
<engine on="no" />
</rumble>
<cars>
<car type="default" first="0" second="0" third="0" max="0" shift="0" final="0" threshold="0" angle="0" />
</cars>
</config>

[tifosi79]

I found the reason I was not seeing <settings version="1" >

I didn't have a global XML document under Open settings folder. All I had was a default XML file and the lastlog file. After I clicked on the Save settings to active profile button a global XML file was created. Anyway, I am going to start a new thread with the actual problem I am having and the reason I was trying to create the lastlog file from the very beginning.

[tifosi79]

And by the way. In order to create the global XMP Document I had to select (Default profile) before clicking the "Save settings to active profile" button. If I had iRacing or any other than default selected under Active profile before clicking the "Save settings to active profile" button, the I would get a "FanaLEDs.exe has stopped working" message window.

[Bose321]

Solved via email contact after trying 2.3e.